Additive Onboarding Instructions - Xometry's Manufacturing Community
<main> <article class="userContent"> <p>Thank you for your interest in becoming an Additive Partner at Xometry!</p><p>We are currently onboarding partners who have DMLS and/or FDM capabilities and meet the criteria below. If you meet the following criteria please let us know by emailing <strong>partneronboarding@xometry.com</strong>.</p><h2 data-id="dmls-manufacturers">DMLS Manufacturers</h2><p>DMLS Shops which run:</p><ul><li>These approved DMLS machines: <a href="https://community.xometry.com/kb/articles/539-additive-guide" rel="nofollow noreferrer ugc">HERE</a></li><li>These materials:<ul><li>AlSiMg</li><li>17-4 Stainless</li><li>316L Stainless</li></ul></li><li>Shops which have been running these machines/materials in a high-volume manufacturing shop for a <strong>minimum of 2 years</strong>.</li></ul><h2 data-id="fdm-manufacturers">FDM Manufacturers</h2><p>FDM Shops which run:</p><ul><li>Shops which run these Stratasys machines:<ul><li>Fortus 370s</li><li>Fortus 400s</li><li>Fortus 450s</li><li>Fortus 900s</li></ul></li><li>Any of the Fortus materials<ul><li>We do not currently allow 3rd party (non-Stratasys) manufactured materials in our network.</li></ul></li><li>Shops which have been running these Fortus machines in a high-volume manufacturing environment for a <strong>minimum of 1 year</strong>.</li></ul><p>If you are a match for any of the above, please let us know:</p><ul><li>The machines and materials you run</li><li>How long you’ve been running them</li><li>Your current machine capacity</li><li>Your approximate utilization rate for the last year</li></ul><p>Thank you very much for your time!</p> </article> </main>