Common Surface Defects which are not acceptable to ship:
Finish Definitions (can also be found here):
- In addition to the removal of support structures, the part surface is media blasted to provide a uniform finish.
- Additional DMLS post-processing, such as CNC Machining of features and polishing, are evaluated on a case-by-case basis. For examples of our additional finishes, please refer to the DMLS section of our photo gallery.
Sample Parts for Onboarding
- The sample part for onboarding is the same part we use for our CNC test part. It is actually a very good part for DMLS with tapped holes, and a tricky orientation decision to make to minimize warping while preserving surface quality.